All Printers

ARTILLERY SIDEWINDER X2

direct driveAuto-LevelMarlin

Specifications

Build Volume
300x300x400mm
Bed Type
Glass
Max Nozzle Temp
260°C
Max Bed Temp
130°C
Cooling
standard
Max Speed
150 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Z-axis sagging

Some users report minor sagging on the Z-axis due to cantilever design.

Mitigation: Ensure proper assembly and consider upgrading to a dual Z-axis setup if problems persist.

Filament Compatibility

PLAexcellentPrints easily with good adhesion on glass bed.
PETGgoodRequires a higher bed temperature and cooling adjustments.
ABSfairPrints may warp without an enclosed build chamber.
ASAfairSimilar challenges to ABS, recommend enclosure for best results.
TPUgoodDirect drive extruder handles flexible filaments well.
NylonfairDifficulty in adhesion and requires high bed temperature.
PCpoorLimited success due to high printing temperatures required.

Maintenance Tips

Regularly tighten all frame screws to maintain structural integrity.
Clean the glass bed with isopropyl alcohol before printing.
Lubricate the z-axis lead screw periodically to ensure smooth movement.

Popular Upgrades

Dual Z-axis kit
PEI spring steel build plate
All-metal hotend

Best For

Large format printingPrototyping

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Artillery Sidewinder X2 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer