All Printers

ANYCUBIC MEGA X

BowdenMarlin

Specifications

Build Volume
300x300x305
Bed Type
Ultrabase Glass
Max Nozzle Temp
260°C
Max Bed Temp
100°C
Cooling
Single Part Cooling Fan
Max Speed
100 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

info

Bed leveling challenges

Due to the large bed size, manual leveling can be challenging and time-consuming.

Mitigation: Use a dial indicator or third-party auto bed leveling sensor for more consistent results.

Filament Compatibility

PLAexcellentPrints very well with minimal adjustment.
PETGgoodRequires tuning of retraction settings to prevent stringing.
ABSfairBetter results with an enclosure to maintain stable temperatures.
ASAfairSimilar to ABS; requires stable temperature control.
TPUgoodSlower print speeds needed due to bowden setup.
NylonpoorNot recommended without upgrades, struggles to maintain needed temperatures.
PCpoorDifficult to print due to high temperature requirements.

Maintenance Tips

Regularly check and tighten all frame screws.
Clean the bed surface before every print to ensure adhesion.
Lubricate the rods and lead screws periodically.

Popular Upgrades

BLTouch auto bed leveling sensor
Stronger stepper motor drivers
Upgraded silent motherboard

Best For

large model projectsbeginner to intermediate users

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Anycubic Mega X - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer