ANYCUBIC KOBRA S1

Direct DriveEnclosedAuto-LevelKobra OS

Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

info

Some users report adhesion issues on the glass bed.

Mitigation: Use adhesive substances like glue stick or hairspray to improve adhesion.

warning

Automatic bed leveling may need manual Z-offset adjustment.

Mitigation: Manually adjust Z-offset after auto-leveling for better first layer adhesion.

PLAexcellentPerforms very well with default settings.

PETGgoodMinor stringing may occur; adjust retraction settings.

ABSfairNeeds enclosure to prevent warping and layer separation.

ASAfairSimilar to ABS, requires controlled environment.

TPUgoodDirect drive extruder handles flexible filaments well.

NylonpoorRequires high temperature and dry storage conditions, not ideal without enclosure.

PCpoorHigh warping potential; enclosure recommended.

Regularly clean the nozzle to avoid clogs.

Check bed leveling before each print.

Keep the lead screw lubricated for smooth movements.

Upgrade to a dual drive extruder for better filament control.

Install a PEI spring steel sheet for improved bed adhesion.

Add an enclosure for better ABS/ASA printing capabilities.Amazon →

Beginners looking for affordabilityPLA and flexible filament applications

FixMyPrint generates exact slicer settings for the Anycubic Kobra S1 - calibrated for your filament and slicer in seconds.