All Printers

ANYCUBIC KOBRA NEO 2

bowdenAuto-LevelMarlin

Specifications

Build Volume
220x220x250mm
Bed Type
Glass
Max Nozzle Temp
260°C
Max Bed Temp
110°C
Cooling
standard
Max Speed
100 mm/s
Max Acceleration
1000 mm/s²
Nozzle Sizes
0.4mm

Known Issues

info

Minor bed adhesion issues

Some users experience bed adhesion issues with certain filaments on the glass bed.

Mitigation: Use a glue stick or hairspray to enhance bed adhesion.

Filament Compatibility

PLAexcellentReliable prints with standard settings.
PETGgoodMay require tuning of retraction settings to prevent stringing.
ABSfairLacks enclosure, which can cause warping during ABS prints.
ASAfairSimilar to ABS, may experience warping without enclosure.
TPUfairBowden extruder may cause difficulty printing flexible materials.
NylonpoorRequires high temperatures; not optimal without a heated chamber.
PCpoorHigh printing temperatures are needed, and adhesion can be challenging.

Maintenance Tips

Regularly check and tighten screws to reduce vibration.
Clean the bed with isopropyl alcohol to ensure good adhesion.
Lubricate the Z-axis lead screw to maintain smooth operation.

Popular Upgrades

Install a PEI sheet on the bed for improved adhesion.
Upgrade the extruder to a direct drive for better flexible filament handling.
Add dampers to stepper motors to reduce noise.

Best For

hobbyistsbudget-friendly home use

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Anycubic Kobra Neo 2 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer