All Printers

ANYCUBIC KOBRA NEO

bowdenAuto-LevelMarlin

Specifications

Build Volume
220x220x250mm
Bed Type
Textured PEI
Max Nozzle Temp
260°C
Max Bed Temp
110°C
Cooling
standard
Max Speed
100 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Bed Adhesion

Inconsistent bed adhesion observed with certain materials.

Mitigation: Use glue stick or slurry for better adhesion.

Filament Compatibility

PLAexcellentProvides consistent results with detailed prints.
PETGgoodMay require adjustments in temperature for optimal results.
ABSfairRequires good ventilation due to fumes and potential warping.
ASAfairSimilar to ABS, requires controlled environment.
TPUgoodPrints well with adjustments to speed and retraction.
NylonpoorHigh moisture sensitivity, challenging without enclosure.
PCpoorHigh temperature requirements, difficult without enclosure.

Maintenance Tips

Regularly clean the nozzle to prevent clogs.
Keep the build surface clean to maintain optimal adhesion.
Check and tighten belts and screws periodically.

Popular Upgrades

Upgraded cooling fans for more consistent temperature management.
Direct drive extruder conversion for flexible filament.
Auto bed leveling sensor replacement for enhanced accuracy.

Best For

Hobbyist projectsPrototyping in PLA and PETG

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Anycubic Kobra Neo - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer