All Printers

ANYCUBIC KOBRA 3 V2

Direct DriveAuto-LevelKobra OS
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Anycubic Kobra 3 V2 technical specifications
Build Volume255x255x260mm
Bed TypePEI Spring Steel
Max Nozzle Temp300°C
Max Bed Temp110°C
Hotend TypeAll-Metal
CoolingDual Fan Cooling
Max Speed180 mm/s
Max AccelerationN/A
Motion Systembedslinger
FirmwareKobra OS
Nozzle Sizes0.4mm

Known Issues

info

Bed adhesion issues

Some users reported poor adhesion with certain filament types.

Mitigation: Use adhesion aids like glue stick or hairspray, and ensure bed leveling.

See the full fix guide →

Filament Compatibility

PLAexcellentPerforms very well with default settings.
PETGgoodMay require bed adhesion aids.
ABSfairRequires an enclosure for best results.
ASAfairSimilar to ABS, enclosure recommended.
TPUgoodPrints well with slower speeds.
NylonpoorHigh temperatures and enclosure are necessary.
PCpoorChallenging; an enclosure is required.

Maintenance Tips

Regularly clean the glass bed with isopropyl alcohol.
Check belt tension monthly to ensure optimal performance.
Inspect the nozzle for clogs and clean as necessary.

Popular Upgrades

All-metal hotend for higher temperature materials.
Upgraded cooling fans for better bridging.
Enclosure for better temperature control.Amazon →

Best For

Hobbyist projectsPrototyping with PLA and PETG

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Anycubic Kobra 3 V2 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer