All Printers

ANYCUBIC KOBRA 3 MAX

Direct DriveAuto-LevelKobra OS

Specifications

Build Volume
420x420x500
Bed Type
PEI Spring Steel
Max Nozzle Temp
300°C
Max Bed Temp
90°C
Cooling
Dual Fan Cooling
Max Speed
180 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Bed adhesion problems

Users report difficulty with first layer adhesion on large prints.

Mitigation: Use glue stick or hair spray on glass bed, and adjust Z-offset.

Filament Compatibility

PLAexcellentEasy to print with default settings.
PETGgoodUse a fan to prevent stringing.
ABSfairRequires enclosure to prevent warping.
ASAfairSimilar to ABS; better UV resistance.
TPUgoodDirect drive improves flexibility handling.
NylonfairNeeds higher temperatures and enclosure.
PCpoorRequires high temperatures; difficult on glass bed.

Maintenance Tips

Regularly clean the nozzle to prevent clogs.
Tighten the belts to avoid print artifacts.
Check and calibrate bed leveling often.

Popular Upgrades

Replace glass bed with textured PEI sheet.
Add an enclosure for better temperature control.
Upgrade cooling fan for better overhang performance.

Best For

Large format printingVersatile material usage

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Anycubic Kobra 3 Max - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer