All Printers

ANYCUBIC KOBRA 2 PRO

Direct DriveAuto-LevelKlipper-based

Specifications

Build Volume
250x220x220
Bed Type
PEI Spring Steel
Max Nozzle Temp
260°C
Max Bed Temp
110°C
Cooling
Dual Fan Cooling
Max Speed
500 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Z-Wobble

Some users report Z-wobble at higher print speeds.

Mitigation: Ensure all screws are tight and consider printing at lower speeds.

Filament Compatibility

PLAexcellentWorks well with the provided cooling system.
PETGgoodRequires fine-tuning of speed and temperature.
ABSgoodBest printed with an enclosure to prevent warping.
ASAfairSimilar issues to ABS, consider an enclosure.
TPUfairDirect drive supports TPU but might need slower speeds.
NylonfairCan be challenging due to high moisture absorption.
PCpoorHigh temperatures can be difficult to maintain.

Maintenance Tips

Regularly clean and lubricate the Z-axis lead screw.
Check belt tension every month for optimal performance.
Clean the bed surface with isopropyl alcohol before each print.

Popular Upgrades

All-metal hotend for higher temperature materials.
Enclosure for better ABS and ASA printing.
Upgraded part cooling fan for improved overhangs.

Best For

PrototypingHobbyist printing

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Anycubic Kobra 2 Pro - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer