All Printers

ANYCUBIC KOBRA 2 PLUS

Direct DriveAuto-LevelMarlin
Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

Anycubic Kobra 2 Plus technical specifications
Build Volume320x320x400
Bed TypePEI Spring Steel
Max Nozzle Temp260°C
Max Bed Temp90°C
Hotend TypePTFE-lined
CoolingDual Fan Cooling
Max Speed200 mm/s
Max Acceleration3000 mm/s²
Motion Systembedslinger
FirmwareMarlin
Nozzle Sizes0.4mm

Known Issues

info

Z-axis wobble

Some users report slight wobbling in the Z-axis during tall prints.

Mitigation: Ensure the printer is on a stable surface and check Z-axis rods for straightness.

Filament Compatibility

PLAexcellentPerforms well at standard speeds and temperatures.
PETGgoodRequires careful bed adhesion management.
ABSfairLacks an enclosure; susceptible to warping.
ASAfairSimilar to ABS; consider using aftermarket enclosure.
TPUgoodFlexible materials work due to direct drive system.
NylonfairLimited by max temperature settings.
PCpoorHigh temp requirements may not be met.

Maintenance Tips

Regularly check and tighten all frame screws.
Clean the bed with isopropyl alcohol before each print.
Inspect and clean nozzle to prevent clogs.

Popular Upgrades

Adding an aftermarket enclosure.Amazon →
Upgrading to a hardened steel nozzle.Amazon →
Installing a better part cooling fan.

Best For

Large-scale prototypingFlexible filament printing

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Anycubic Kobra 2 Plus - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer