ANYCUBIC KOBRA 2

direct driveAuto-LevelMarlin

Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

info

Users have reported occasional Z-axis wobble affecting print quality.

Mitigation: Ensure all screws and belts are tightened and consider upgrading to anti-backlash nuts.

PLAexcellentOptimal for a range of standard projects.

PETGgoodPrints well with slight adjustments to speed and temperature.

ABSfairRequires an enclosure to minimize warping.

ASAfairSimilar to ABS, may need an enclosure for best results.

TPUgoodCapable with proper retraction settings and slower speeds.

NylonpoorNot recommended due to printer's open frame and temperature limits.

PCpoorLimited by lower max bed temperature, difficult to print reliably.

Regularly clean the build surface to maintain adhesion.

Check and tighten belts periodically to prevent slack.

Lubricate the Z-axis lead screw to ensure smooth movement.

All-metal hotend for higher temperature reliability.

Stronger stepper motor drivers to enhance print quality.

Improved cooling fans for better layer adhesion.

Hobby projectsPrototyping

FixMyPrint generates exact slicer settings for the Anycubic Kobra 2 - calibrated for your filament and slicer in seconds.