ANYCUBIC CHIRON

BowdenAuto-LevelMarlin

Buy on Amazon →Affiliate link - helps support FixMyPrint

Specifications

warning

Inconsistent auto bed leveling results leading to first-layer adhesion problems.

Mitigation: Manually level the bed to ensure uniformity or recalibrate the auto-leveling sensor.

info

Observations of slight Z-axis wobble affecting print quality.

Mitigation: Tighten the mechanical components of the Z-axis and lubricate the leadscrews.

PLAexcellentPerforms well with standard settings and minimal adjustments.

PETGgoodRequires careful tuning to avoid stringing due to bowden setup.

ABSfairLimited by lack of enclosure and max bed temperature.

ASAfairSimilar challenges as ABS, enclosure recommended for better results.

TPUpoorBowden extruder struggles with flexible filaments.

NylonpoorHigh warping and adhesion challenges without an enclosure.

PCpoorPrinter's temperature specifications are not ideal for PC.

Regularly check and tighten all frame screws to maintain rigidity.

Clean the glass bed with isopropyl alcohol for optimal adhesion.

Lubricate the leadscrews and rods to ensure smooth movement.

Replace the stock extruder with a direct drive extruder for better TPU printing.Amazon →

Upgrade to a magnetic flexible build plate for easier print removal.

Install a filament sensor to prevent running out of filament mid-print.

Large volume printsPLA-based prototyping

FixMyPrint generates exact slicer settings for the Anycubic Chiron - calibrated for your filament and slicer in seconds.