All Printers

ANKERMAKE M5

direct driveAuto-LevelMarlin

Specifications

Build Volume
235x235x250mm
Bed Type
Textured PEI
Max Nozzle Temp
260°C
Max Bed Temp
100°C
Cooling
high
Max Speed
500 mm/s
Max Acceleration
5000 mm/s²
Nozzle Sizes
0.4mm · 0.6mm · 0.8mm

Known Issues

info

Noisy operation

The printer can be louder than expected during operation.

Mitigation: Consider placing the printer on a vibration-dampening mat.

warning

Occasional bed adhesion issues

Users have reported print bed adhesion issues with certain filaments.

Mitigation: Use a brim or raft to improve adhesion, and ensure the bed is clean before printing.

Filament Compatibility

PLAexcellentPrints smoothly and reliably with PLA.
PETGgoodRequires careful tuning for best results.
ABSfairLimited by open frame; enclosure recommended for optimal results.
ASAfairSimilar to ABS, may require an enclosure.
TPUgoodDirect drive extruder handles TPU well, but speed must be reduced.
NylonfairMoisture-sensitive, benefits from heated enclosure.
PCpoorNot recommended without a heated chamber.

Maintenance Tips

Regularly clean the PEI surface for optimal adhesion.
Lubricate the linear rails to ensure smooth operation.
Check and tighten any loose screws periodically to maintain structural integrity.

Popular Upgrades

Add a Raspberry Pi for OctoPrint integration
Install dampers for quieter stepper operation
Upgrade to an all-metal hotend for higher temperature printing

Best For

PrototypingEducational purposesHobbyists wanting a reliable and fast printer

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the AnkerMake M5 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer