All Printers

ANET A8

bowdenMarlin

Specifications

Build Volume
220x220x240mm
Bed Type
Aluminum with BuildTac sheet
Max Nozzle Temp
260°C
Max Bed Temp
100°C
Cooling
standard
Max Speed
100 mm/s
Max Acceleration
N/A
Nozzle Sizes
0.4mm

Known Issues

warning

Fire Hazard

The connectors for the heated bed and mainboard are prone to overheating and potential fire.

Mitigation: Upgrade to better connectors or solder the wires directly to the board.

info

Frame Stability

The acrylic frame can be unstable, leading to vibrations.

Mitigation: Tighten all screws regularly and consider upgrading to a metal frame.

Filament Compatibility

PLAexcellentEasy to print with adequate cooling.
PETGgoodRequires careful tuning to avoid stringing.
ABSfairDifficult without an enclosure and proper ventilation.
ASAfairSimilar challenges as ABS, benefits from enclosure.
TPUpoorBowden setup struggles with flexible filaments.
NylonpoorRequires high temperatures and enclosure.
PCpoorHigh temperatures and enclosure necessary.

Maintenance Tips

Regularly check and tighten all screws to keep the frame stable.
Clean the nozzle regularly to prevent clogs.
Lubricate the rods and bearings for smooth operation.

Popular Upgrades

MOSFET upgrade for heated bed
Metal frame upgrade
Auto bed leveling sensor

Best For

Hobbyist projectsBudget-conscious users

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for the Anet A8 - calibrated for your filament and slicer in seconds.

Generate Settings for This Printer