All Filaments

WOOD FILL PLA

PLA blended with sawdust. Sands and stains like real wood.

beginnerSpecialty

Specifications

Nozzle Temperature
195-220°C
Bed Temperature
50-60°C
Max Print Speed
50 mm/s
Drying Temp
45°C
Drying Time
4 hours
Enclosure
Not needed
Moisture Sensitive
No

Signs of Moisture

Watch for these signs
  • popping during extrusion
  • scorched wood smell
  • rough surface beyond the natural grain
  • stringing

Storage Requirements

Temperature
15-25°C
Max Humidity
30% RH
Container
resealable bag with silica gel desiccant

Known Issues

Clogs on small nozzles

Cause: Wood particles bridge across narrow bores

Fix: Use 0.5mm or 0.6mm nozzle, hardened recommended

Charring at high temps

Cause: Wood burns above 220°C

Fix: Stay at the low end of the temp range and avoid long idle times

Brittle prints

Cause: Wood filler reduces inter-layer strength

Fix: Use for decorative prints only and increase wall count

Best For

decorative pieces and signsprops with a wood lookstained or sanded display models

Not Good For

structural partssmall detailed nozzles (under 0.4mm)outdoor unsealed prints

Compatible Build Surfaces

PEI
magnetic spring steel
glass with glue stick

Post-Processing Options

sanding (transforms surface dramatically)
wood stain or oil
lacquer or polyurethane sealing

Popular Brands

Brand-specific recommended temps and quirks. Click through for the full settings page.

19 brands found

Aceaddity

Good
N 205°C B 45°C

Recommended 205°C nozzle / 45°C bed. Single-source profile (openfilament); verify before relying on it.

View settings

Amolen

Good
N 210°C B 60°C

Recommended 210°C nozzle / 60°C bed. Single-source profile (openfilament); verify before relying on it.

View settings

Aurapol

Good
N 210°C B 60°C

Recommended 210°C nozzle / 60°C bed. Single-source profile (openfilament); verify before relying on it.

View settings

Bambu Lab

Good
N 215°C B 40°C

Recommended 215°C nozzle / 40°C bed.

View settings

Extrudr

Good
N 210°C B 60°C

Recommended 210°C nozzle / 60°C bed.

View settings

Geeetech

Good
N 210°C B 42°C

Recommended 210°C nozzle / 42°C bed. Single-source profile (openfilament); verify before relying on it.

View settings

Hatchbox

Good
N 210°C B 60°C

Recommended 210°C nozzle / 60°C bed. Single-source profile (openfilament); verify before relying on it.

View settings

Numakers

Good
N 215°C B 50°C

Recommended 215°C nozzle / 50°C bed. Single-source profile (openfilament); verify before relying on it.

View settings

Qidi Tech

Good
N 205°C B 45°C

Recommended 205°C nozzle / 45°C bed. Single-source profile (openfilament); verify before relying on it.

View settings

Sakata 3D

Good
N 210°C B 60°C

Recommended 210°C nozzle / 60°C bed. Single-source profile (openfilament); verify before relying on it.

View settings

Smart Materials 3D

Good
N 210°C B 60°C

Recommended 210°C nozzle / 60°C bed. Single-source profile (openfilament); verify before relying on it.

View settings

SUNLU

Good
N 210°C B 60°C

Recommended 210°C nozzle / 60°C bed.

View settings

DIALED-IN SETTINGS

FixMyPrint generates exact slicer settings for Wood Fill PLA- calibrated for your printer and slicer in seconds.

Generate Settings for Wood Fill PLA