PLA META (HIGH-SPEED PLA)
High-flow PLA engineered for fast printing with reduced clogging and stringing.
beginnerStandardMoisture sensitive
Specifications
Nozzle Temperature
180-220°C
Bed Temperature
45-60°C
Max Print Speed
250 mm/s
Drying Temp
45°C
Drying Time
6 hours
Enclosure
Not needed
Moisture Sensitive
Yes
Signs of Moisture
Watch for these signs
- Popping sounds during extrusion
- Reduced surface gloss
- Stringing despite correct temperature
Storage Requirements
Temperature
15-25°C
Max Humidity
30% RH
Container
sealed container
Known Issues
Stringing and oozing
Cause: Overly high temperature negates the low-clog design benefit
Fix: Stay near the recommended 195°C - going much higher reintroduces stringing this filament is designed to avoid.
Layer separation
Cause: Print speed too low for the filament's flow characteristics
Fix: This filament is designed for higher speeds (150-250mm/s). Printing too slow can cause uneven layer bonding.
Best For
Fast prototypingHigh-speed printing (150-250mm/s)Reducing clogs on fast printersBeginners wanting reliable fast prints
Not Good For
Functional parts needing high heat resistanceOutdoor or high-stress applications
Compatible Build Surfaces
pei
glass
textured_pei
blue_tape
Post-Processing Options
sanding
painting
gluing
Popular Brands
SUNLUJAYO
DIALED-IN SETTINGS
FixMyPrint generates exact slicer settings for PLA Meta (High-Speed PLA)- calibrated for your printer and slicer in seconds.
Generate Settings for PLA Meta (High-Speed PLA)