All Guides

POOR OVERHANGS ON BAMBU LAB P1S WITH PLA_PLUS- COMMUNITY FIXES

Bambu Lab P1S PLA_plusPoor Overhangs

6 posts in our dataset matching Bambu Lab P1S + PLA_plus + poor overhangs.

We pulled the 6 matching cases from r/FixMyPrint and ranked the fixes by how often they were OP-confirmed or top-voted. Use these as a starting point - the deterministic engine on Fix My Print can adjust your specific slicer settings.

TOP CONFIRMED FIXES

Confirmed on Bambu Lab P1S with PLA_plus

  1. #1

    Reduce layer height

    Confirmed by 1 userSuggested in 13 posts8% success rate
  2. #2

    Reduce print speed

    Suggested in 3 posts
  3. #3

    Increase part cooling

    Suggested in 2 posts
  4. #4

    Increase nozzle temperature

    Suggested in 1 post

Full Failure Guide

Want the full breakdown of poor overhangs - what causes it, how to diagnose it on the bed, and the fixes by cause? Read the failure guide.

Read the Poor Overhangs guide

Printer Profile

Full specs, filament compatibility ratings, and the known quirks of the Bambu Lab P1S - including which materials it handles well and where it tends to struggle.

View the Bambu Lab P1S profile

FIX YOUR BAMBU LAB P1S NOW

Run a personalized diagnosis. The engine knows your printer's limits and PLA_plus's working range, and returns exact slicer adjustments instead of generic advice.

Run a personalized diagnosis