All Guides

RINGING / GHOSTING ON BAMBU LAB P1S WITH PETG- COMMUNITY FIXES

Bambu Lab P1S PETGRinging / Ghosting

7 posts in our dataset matching Bambu Lab P1S + PETG + ringing / ghosting.

We pulled the 7 matching cases from r/FixMyPrint and ranked the fixes by how often they were OP-confirmed or top-voted. Use these as a starting point - the deterministic engine on Fix My Print can adjust your specific slicer settings.

TOP CONFIRMED FIXES

Confirmed on Bambu Lab P1S with PETG

  1. #1

    Tune input shaping / resonance compensation

    Suggested in 6 posts
  2. #2

    Tune pressure advance

    Suggested in 4 posts
  3. #3

    Dry the filament

    Suggested in 3 posts
  4. #4

    Reduce print speed

    Suggested in 3 posts
  5. #5

    Increase nozzle temperature

    Suggested in 2 posts

Full Failure Guide

Want the full breakdown of ringing / ghosting - what causes it, how to diagnose it on the bed, and the fixes by cause? Read the failure guide.

Read the Ringing / Ghosting guide

Printer Profile

Full specs, filament compatibility ratings, and the known quirks of the Bambu Lab P1S - including which materials it handles well and where it tends to struggle.

View the Bambu Lab P1S profile

FIX YOUR BAMBU LAB P1S NOW

Run a personalized diagnosis. The engine knows your printer's limits and PETG's working range, and returns exact slicer adjustments instead of generic advice.

Run a personalized diagnosis