All Guides

BLOBS / ZITS ON BAMBU LAB P1S WITH PETG- COMMUNITY FIXES

Bambu Lab P1S PETGBlobs / Zits

50 posts in our dataset matching Bambu Lab P1S + PETG + blobs / zits.

We pulled the 50 matching cases from r/FixMyPrint and ranked the fixes by how often they were OP-confirmed or top-voted. Use these as a starting point - the deterministic engine on Fix My Print can adjust your specific slicer settings.

TOP CONFIRMED FIXES

Confirmed on Bambu Lab P1S with PETG

  1. #1

    Dry the filament

    Confirmed by 2 usersSuggested in 19 posts33% success rate
  2. #2

    Reduce retraction distance

    Confirmed by 1 userSuggested in 11 posts13% success rate
  3. #3

    Calibrate flow rate

    Confirmed by 1 userSuggested in 7 posts25% success rate
  4. #4

    Tune pressure advance

    Confirmed by 1 userSuggested in 4 posts33% success rate
  5. #5

    Increase nozzle temperature

    Confirmed by 1 userSuggested in 2 posts50% success rate

Full Failure Guide

Want the full breakdown of blobs / zits - what causes it, how to diagnose it on the bed, and the fixes by cause? Read the failure guide.

Read the Blobs / Zits guide

Printer Profile

Full specs, filament compatibility ratings, and the known quirks of the Bambu Lab P1S - including which materials it handles well and where it tends to struggle.

View the Bambu Lab P1S profile

FIX YOUR BAMBU LAB P1S NOW

Run a personalized diagnosis. The engine knows your printer's limits and PETG's working range, and returns exact slicer adjustments instead of generic advice.

Run a personalized diagnosis