Wood Fill PLA brand profile
VELLEMAN
Recommended nozzle temp 210°C. Single-source profile (cura); verify before relying on it.
Community: FairWood Fill PLA
Brand-Specific Recommended Settings
Recommended Nozzle
210°C
Generic Wood Fill PLA: 195-220°C
Recommended Bed
50°C
Generic Wood Fill PLA: 50-60°C
Max Print Speed
50 mm/s
Inherited from Wood Fill PLA profile
How Velleman Differs from Generic Wood Fill PLA
Nozzle: 210°C- sits inside the generic Wood Fill PLA range (195-220°C).
Bed: 50°C- at the generic minimum (generic Wood Fill PLA: 50-60°C).
Community Verdict
Fair
Recommended nozzle temp 210°C. Single-source profile (cura); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all Wood Fill PLA brands, see the Wood Fill PLA profile.
DIALED-IN VELLEMAN SETTINGS
Generate a complete slicer profile tuned for Velleman on your specific printer and slicer in seconds.
Generate Settings for Velleman