Silk PLA brand profile
FILAMENT PM
Recommended 210°C nozzle / 60°C bed. Silk finish. Single-source profile (openfilament); verify before relying on it.
Community: GoodSilk PLA
Shop Filament PM Silk PLA →Affiliate link - helps support FixMyPrint
Brand-Specific Recommended Settings
Recommended Nozzle
210°C
Generic Silk PLA: 210-220°C
Recommended Bed
60°C
Generic Silk PLA: 50-65°C
Max Print Speed
60 mm/s
Inherited from Silk PLA profile
How Filament PM Differs from Generic Silk PLA
Nozzle: 210°C- at the generic minimum (generic Silk PLA: 210-220°C).
Bed: 60°C- sits inside the generic Silk PLA range (50-65°C).
Community Verdict
Good
Recommended 210°C nozzle / 60°C bed. Silk finish. Single-source profile (openfilament); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all Silk PLA brands, see the Silk PLA profile.
DIALED-IN FILAMENT PM SETTINGS
Generate a complete slicer profile tuned for Filament PM on your specific printer and slicer in seconds.
Generate Settings for Filament PM