PETG brand profile
PRINTED SOLID
Recommended 245°C nozzle / 90°C bed. Max volumetric flow ~3.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodPETG
Brand-Specific Recommended Settings
Recommended Nozzle
245°C
Generic PETG: 247-257°C
Recommended Bed
90°C
Generic PETG: 70-85°C
Max Print Speed
60 mm/s
Inherited from PETG profile
How Printed Solid Differs from Generic PETG
Nozzle: 245°C- 2°C below the generic floor (generic PETG: 247-257°C).
Bed: 90°C- 5°C above the generic ceiling (generic PETG: 70-85°C).
Community Verdict
Good
Recommended 245°C nozzle / 90°C bed. Max volumetric flow ~3.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PETG brands, see the PETG profile.
DIALED-IN PRINTED SOLID SETTINGS
Generate a complete slicer profile tuned for Printed Solid on your specific printer and slicer in seconds.
Generate Settings for Printed Solid