PETG brand profile
KIWIFIL
Recommended 235°C nozzle / 80°C bed. Single-source profile (openfilament); verify before relying on it.
Community: GoodPETG
Brand-Specific Recommended Settings
Recommended Nozzle
235°C
Generic PETG: 247-257°C
Recommended Bed
80°C
Generic PETG: 70-85°C
Max Print Speed
60 mm/s
Inherited from PETG profile
How Kiwifil Differs from Generic PETG
Nozzle: 235°C- 12°C below the generic floor (generic PETG: 247-257°C).
Bed: 80°C- sits inside the generic PETG range (70-85°C).
Community Verdict
Good
Recommended 235°C nozzle / 80°C bed. Single-source profile (openfilament); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PETG brands, see the PETG profile.
DIALED-IN KIWIFIL SETTINGS
Generate a complete slicer profile tuned for Kiwifil on your specific printer and slicer in seconds.
Generate Settings for Kiwifil