PETG brand profile
INFIMECH
Recommended 245°C nozzle / 75°C bed. Max volumetric flow ~12.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
Community: ExcellentPETG
Brand-Specific Recommended Settings
Recommended Nozzle
245°C
Generic PETG: 247-257°C
Recommended Bed
75°C
Generic PETG: 70-85°C
Max Print Speed
60 mm/s
Inherited from PETG profile
How InfiMech Differs from Generic PETG
Nozzle: 245°C- 2°C below the generic floor (generic PETG: 247-257°C).
Bed: 75°C- sits inside the generic PETG range (70-85°C).
Community Verdict
Excellent
Recommended 245°C nozzle / 75°C bed. Max volumetric flow ~12.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PETG brands, see the PETG profile.
DIALED-IN INFIMECH SETTINGS
Generate a complete slicer profile tuned for InfiMech on your specific printer and slicer in seconds.
Generate Settings for InfiMech