PETG brand profile
FORWARD AM
Recommended 215°C nozzle / 70°C bed. Max volumetric flow ~8.67 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodPETG
Brand-Specific Recommended Settings
Recommended Nozzle
215°C
Generic PETG: 247-257°C
Recommended Bed
70°C
Generic PETG: 70-85°C
Max Print Speed
60 mm/s
Inherited from PETG profile
How Forward AM Differs from Generic PETG
Nozzle: 215°C- 32°C below the generic floor (generic PETG: 247-257°C).
Bed: 70°C- at the generic minimum (generic PETG: 70-85°C).
Community Verdict
Good
Recommended 215°C nozzle / 70°C bed. Max volumetric flow ~8.67 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PETG brands, see the PETG profile.
DIALED-IN FORWARD AM SETTINGS
Generate a complete slicer profile tuned for Forward AM on your specific printer and slicer in seconds.
Generate Settings for Forward AM