PETG brand profile
FILLAMENTUM
Recommended 270°C nozzle / 90°C bed. Max volumetric flow ~4.0 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodPETG
Brand-Specific Recommended Settings
Recommended Nozzle
270°C
Generic PETG: 247-257°C
Recommended Bed
90°C
Generic PETG: 70-85°C
Max Print Speed
60 mm/s
Inherited from PETG profile
How Fillamentum Differs from Generic PETG
Nozzle: 270°C- 13°C above the generic ceiling (generic PETG: 247-257°C).
Bed: 90°C- 5°C above the generic ceiling (generic PETG: 70-85°C).
Community Verdict
Good
Recommended 270°C nozzle / 90°C bed. Max volumetric flow ~4.0 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PETG brands, see the PETG profile.
DIALED-IN FILLAMENTUM SETTINGS
Generate a complete slicer profile tuned for Fillamentum on your specific printer and slicer in seconds.
Generate Settings for Fillamentum