PETG brand profile
FDPLAST
Recommended 220°C nozzle / 70°C bed. Single-source profile (cura); verify before relying on it.
Community: GoodPETG
Brand-Specific Recommended Settings
Recommended Nozzle
220°C
Generic PETG: 247-257°C
Recommended Bed
70°C
Generic PETG: 70-85°C
Max Print Speed
60 mm/s
Inherited from PETG profile
How FDplast Differs from Generic PETG
Nozzle: 220°C- 27°C below the generic floor (generic PETG: 247-257°C).
Bed: 70°C- at the generic minimum (generic PETG: 70-85°C).
Community Verdict
Good
Recommended 220°C nozzle / 70°C bed. Single-source profile (cura); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PETG brands, see the PETG profile.
DIALED-IN FDPLAST SETTINGS
Generate a complete slicer profile tuned for FDplast on your specific printer and slicer in seconds.
Generate Settings for FDplast