PETG brand profile
DELTAMAKER
Recommended nozzle temp 250°C. Max volumetric flow ~2.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
Community: GoodPETG
Brand-Specific Recommended Settings
Recommended Nozzle
250°C
Generic PETG: 247-257°C
Recommended Bed
70°C
Generic PETG: 70-85°C
Max Print Speed
60 mm/s
Inherited from PETG profile
How DeltaMaker Differs from Generic PETG
Nozzle: 250°C- sits inside the generic PETG range (247-257°C).
Bed: 70°C- at the generic minimum (generic PETG: 70-85°C).
Community Verdict
Good
Recommended nozzle temp 250°C. Max volumetric flow ~2.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PETG brands, see the PETG profile.
DIALED-IN DELTAMAKER SETTINGS
Generate a complete slicer profile tuned for DeltaMaker on your specific printer and slicer in seconds.
Generate Settings for DeltaMaker