PETG brand profile
ADDNORTH
Recommended 265°C nozzle / 80°C bed. Max volumetric flow ~2.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodPETG
Brand-Specific Recommended Settings
Recommended Nozzle
265°C
Generic PETG: 247-257°C
Recommended Bed
80°C
Generic PETG: 70-85°C
Max Print Speed
60 mm/s
Inherited from PETG profile
How addnorth Differs from Generic PETG
Nozzle: 265°C- 8°C above the generic ceiling (generic PETG: 247-257°C).
Bed: 80°C- sits inside the generic PETG range (70-85°C).
Community Verdict
Good
Recommended 265°C nozzle / 80°C bed. Max volumetric flow ~2.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PETG brands, see the PETG profile.
DIALED-IN ADDNORTH SETTINGS
Generate a complete slicer profile tuned for addnorth on your specific printer and slicer in seconds.
Generate Settings for addnorth