Nylon brand profile
PRIMACREATOR
Recommended 255°C nozzle / 90°C bed. Single-source profile (openfilament); verify before relying on it.
Community: GoodNylon
Brand-Specific Recommended Settings
Recommended Nozzle
255°C
Generic Nylon: 289-299°C
Recommended Bed
90°C
Generic Nylon: 70-90°C
Max Print Speed
50 mm/s
Inherited from Nylon profile
How Primacreator Differs from Generic Nylon
Nozzle: 255°C- 34°C below the generic floor (generic Nylon: 289-299°C).
Bed: 90°C- at the generic maximum (generic Nylon: 70-90°C).
Community Verdict
Good
Recommended 255°C nozzle / 90°C bed. Single-source profile (openfilament); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all Nylon brands, see the Nylon profile.
DIALED-IN PRIMACREATOR SETTINGS
Generate a complete slicer profile tuned for Primacreator on your specific printer and slicer in seconds.
Generate Settings for Primacreator