Nylon brand profile
FILAMENT PM
Recommended 245°C nozzle / 115°C bed. Max volumetric flow ~3.0 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodNylon
Brand-Specific Recommended Settings
Recommended Nozzle
245°C
Generic Nylon: 289-299°C
Recommended Bed
115°C
Generic Nylon: 70-90°C
Max Print Speed
50 mm/s
Inherited from Nylon profile
How Filament PM Differs from Generic Nylon
Nozzle: 245°C- 44°C below the generic floor (generic Nylon: 289-299°C).
Bed: 115°C- 25°C above the generic ceiling (generic Nylon: 70-90°C).
Community Verdict
Good
Recommended 245°C nozzle / 115°C bed. Max volumetric flow ~3.0 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all Nylon brands, see the Nylon profile.
DIALED-IN FILAMENT PM SETTINGS
Generate a complete slicer profile tuned for Filament PM on your specific printer and slicer in seconds.
Generate Settings for Filament PM