Carbon Fiber PLA brand profile
RATRIG
Recommended 205°C nozzle / 60°C bed. Max volumetric flow ~12.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
Community: ExcellentCarbon Fiber PLA
Brand-Specific Recommended Settings
Recommended Nozzle
205°C
Generic Carbon Fiber PLA: 210-230°C
Recommended Bed
60°C
Generic Carbon Fiber PLA: 50-65°C
Max Print Speed
60 mm/s
Inherited from Carbon Fiber PLA profile
How Ratrig Differs from Generic Carbon Fiber PLA
Nozzle: 205°C- 5°C below the generic floor (generic Carbon Fiber PLA: 210-230°C).
Bed: 60°C- sits inside the generic Carbon Fiber PLA range (50-65°C).
Community Verdict
Excellent
Recommended 205°C nozzle / 60°C bed. Max volumetric flow ~12.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all Carbon Fiber PLA brands, see the Carbon Fiber PLA profile.
DIALED-IN RATRIG SETTINGS
Generate a complete slicer profile tuned for Ratrig on your specific printer and slicer in seconds.
Generate Settings for Ratrig