What printers does FixMyPrint support?

We support 70+ popular FDM printers including all Bambu Lab, Prusa, Creality, Elegoo, Anycubic, Voron, Artillery, Qidi, Sovol, and more.

Does FixMyPrint use AI to generate settings?

Settings are generated by our deterministic rule engine - no AI, no randomness. Same input always gives the same output. Fix My Print and Photo Diagnosis use AI to identify problems, but the actual setting adjustments come from our engine with safety-clamped values.

How accurate are the generated settings?

We use conservative, reliable settings - always within safe ranges for your filament and printer. Every value is within validated hardware limits.

What slicers does FixMyPrint support?

Cura, PrusaSlicer, OrcaSlicer, Bambu Studio, SuperSlicer, and Simplify3D. Settings are generated in your slicer's native parameter names.

What filaments are supported?

PLA, PLA+, PETG, ABS, ASA, TPU, Nylon, Polycarbonate, Carbon Fiber PLA, and Silk PLA. Each filament has its own temperature ranges, cooling profiles, and retraction values.

What does Photo Diagnosis do?

Take a photo of your failed print and our AI analyzes it to identify the most likely issues. You get ranked causes with confidence scores, then one-tap fixes powered by our settings engine.

Do I keep my settings history?

Yes - every generation, fix, and diagnosis is saved to your history. You can revisit past results anytime from your dashboard.

How does FixMyPrint pricing work?

Trial gives you 5 free settings generations and 5 fix my print uses - no card needed. Basic is a one-time $19.99 payment for 10 of each per day forever. Pro is $9.99/month (or $89.99/year) and adds Photo Diagnosis and 50 of each per day.

Is a mobile app coming?

iOS and Android apps are in development. Sign up to get notified the moment they launch.

Can I cancel Pro anytime?

Yes - cancel anytime from your profile. No questions, no fees. Access continues until the end of your billing period.

All Guides

UNDER-EXTRUSION ON BAMBU LAB X1C WITH PETG- COMMUNITY FIXES

Bambu Lab X1C PETGUnder-Extrusion

5 posts in our dataset matching Bambu Lab X1C + PETG + under-extrusion.

We pulled the 5 matching cases from r/FixMyPrint and ranked the fixes by how often they were OP-confirmed or top-voted. Use these as a starting point - the deterministic engine on Fix My Print can adjust your specific slicer settings.

TOP CONFIRMED FIXES

Confirmed on Bambu Lab X1C with PETG

#1
Calibrate flow rate
Suggested in 6 posts
#2
Tune pressure advance
Suggested in 1 post
#3
Perform a cold pull
Suggested in 1 post
#4
Dry the filament
Suggested in 1 post
#5
Reduce print speed
Suggested in 1 post

Full Failure Guide

Want the full breakdown of under-extrusion - what causes it, how to diagnose it on the bed, and the fixes by cause? Read the failure guide.

Read the Under-Extrusion guide

FIX YOUR BAMBU LAB X1C NOW

Run a personalized diagnosis. The engine knows your printer's limits and PETG's working range, and returns exact slicer adjustments instead of generic advice.

Run a personalized diagnosis