TPU brand profile
XZN
Recommended 215°C nozzle / 40°C bed. Single-source profile (openfilament); verify before relying on it.
Community: GoodTPU
Brand-Specific Recommended Settings
Recommended Nozzle
215°C
Generic TPU: 227-237°C
Recommended Bed
40°C
Generic TPU: 40-60°C
Max Print Speed
30 mm/s
Inherited from TPU profile
How Xzn Differs from Generic TPU
Nozzle: 215°C- 12°C below the generic floor (generic TPU: 227-237°C).
Bed: 40°C- at the generic minimum (generic TPU: 40-60°C).
Community Verdict
Good
Recommended 215°C nozzle / 40°C bed. Single-source profile (openfilament); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all TPU brands, see the TPU profile.
DIALED-IN XZN SETTINGS
Generate a complete slicer profile tuned for Xzn on your specific printer and slicer in seconds.
Generate Settings for Xzn