TPU brand profile
NINJATEK
Recommended 238°C nozzle / 50°C bed. Max volumetric flow ~2.6 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodTPU
Brand-Specific Recommended Settings
Recommended Nozzle
238°C
Generic TPU: 227-237°C
Recommended Bed
50°C
Generic TPU: 40-60°C
Max Print Speed
30 mm/s
Inherited from TPU profile
How NinjaTek Differs from Generic TPU
Nozzle: 238°C- 1°C above the generic ceiling (generic TPU: 227-237°C).
Bed: 50°C- sits inside the generic TPU range (40-60°C).
Community Verdict
Good
Recommended 238°C nozzle / 50°C bed. Max volumetric flow ~2.6 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all TPU brands, see the TPU profile.
DIALED-IN NINJATEK SETTINGS
Generate a complete slicer profile tuned for NinjaTek on your specific printer and slicer in seconds.
Generate Settings for NinjaTek