TPU brand profile
FILAMENT PM
Recommended nozzle temp 240°C. Max volumetric flow ~1.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodTPU
Brand-Specific Recommended Settings
Recommended Nozzle
240°C
Generic TPU: 227-237°C
Recommended Bed
40°C
Generic TPU: 40-60°C
Max Print Speed
30 mm/s
Inherited from TPU profile
How Filament PM Differs from Generic TPU
Nozzle: 240°C- 3°C above the generic ceiling (generic TPU: 227-237°C).
Bed: 40°C- at the generic minimum (generic TPU: 40-60°C).
Community Verdict
Good
Recommended nozzle temp 240°C. Max volumetric flow ~1.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all TPU brands, see the TPU profile.
DIALED-IN FILAMENT PM SETTINGS
Generate a complete slicer profile tuned for Filament PM on your specific printer and slicer in seconds.
Generate Settings for Filament PM