TPU brand profile
DELTAMAKER
Recommended nozzle temp 235°C. Max volumetric flow ~4.5 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
Community: GoodTPU
Brand-Specific Recommended Settings
Recommended Nozzle
235°C
Generic TPU: 227-237°C
Recommended Bed
40°C
Generic TPU: 40-60°C
Max Print Speed
30 mm/s
Inherited from TPU profile
How DeltaMaker Differs from Generic TPU
Nozzle: 235°C- sits inside the generic TPU range (227-237°C).
Bed: 40°C- at the generic minimum (generic TPU: 40-60°C).
Community Verdict
Good
Recommended nozzle temp 235°C. Max volumetric flow ~4.5 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all TPU brands, see the TPU profile.
DIALED-IN DELTAMAKER SETTINGS
Generate a complete slicer profile tuned for DeltaMaker on your specific printer and slicer in seconds.
Generate Settings for DeltaMaker