PLA brand profile
TWOTREES
Recommended 220°C nozzle / 60°C bed. Max volumetric flow ~25.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
Community: GoodPLA
Brand-Specific Recommended Settings
Recommended Nozzle
220°C
Generic PLA: 200-210°C
Recommended Bed
60°C
Generic PLA: 50-60°C
Max Print Speed
80 mm/s
Inherited from PLA profile
How TwoTrees Differs from Generic PLA
Nozzle: 220°C- 10°C above the generic ceiling (generic PLA: 200-210°C).
Bed: 60°C- at the generic maximum (generic PLA: 50-60°C).
Community Verdict
Good
Recommended 220°C nozzle / 60°C bed. Max volumetric flow ~25.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PLA brands, see the PLA profile.
DIALED-IN TWOTREES SETTINGS
Generate a complete slicer profile tuned for TwoTrees on your specific printer and slicer in seconds.
Generate Settings for TwoTrees