PLA brand profile
TEQSTONE
Recommended 205°C nozzle / 30°C bed. Single-source profile (openfilament); verify before relying on it.
Community: GoodPLA
Brand-Specific Recommended Settings
Recommended Nozzle
205°C
Generic PLA: 200-210°C
Recommended Bed
30°C
Generic PLA: 50-60°C
Max Print Speed
80 mm/s
Inherited from PLA profile
How Teqstone Differs from Generic PLA
Nozzle: 205°C- sits inside the generic PLA range (200-210°C).
Bed: 30°C- 20°C below the generic floor (generic PLA: 50-60°C).
Community Verdict
Good
Recommended 205°C nozzle / 30°C bed. Single-source profile (openfilament); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PLA brands, see the PLA profile.
DIALED-IN TEQSTONE SETTINGS
Generate a complete slicer profile tuned for Teqstone on your specific printer and slicer in seconds.
Generate Settings for Teqstone