PLA brand profile
PRIMAVALUE
Recommended 215°C nozzle / 82°C bed. Single-source profile (openfilament); verify before relying on it.
Community: GoodPLA
Brand-Specific Recommended Settings
Recommended Nozzle
215°C
Generic PLA: 200-210°C
Recommended Bed
82°C
Generic PLA: 50-60°C
Max Print Speed
80 mm/s
Inherited from PLA profile
How Primavalue Differs from Generic PLA
Nozzle: 215°C- 5°C above the generic ceiling (generic PLA: 200-210°C).
Bed: 82°C- 22°C above the generic ceiling (generic PLA: 50-60°C).
Community Verdict
Good
Recommended 215°C nozzle / 82°C bed. Single-source profile (openfilament); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PLA brands, see the PLA profile.
DIALED-IN PRIMAVALUE SETTINGS
Generate a complete slicer profile tuned for Primavalue on your specific printer and slicer in seconds.
Generate Settings for Primavalue