PLA brand profile
FLSUN
Recommended 220°C nozzle / 45°C bed. Max volumetric flow ~50.29 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
Community: ExcellentPLA
Brand-Specific Recommended Settings
Recommended Nozzle
220°C
Generic PLA: 200-210°C
Recommended Bed
45°C
Generic PLA: 50-60°C
Max Print Speed
80 mm/s
Inherited from PLA profile
How FLSun Differs from Generic PLA
Nozzle: 220°C- 10°C above the generic ceiling (generic PLA: 200-210°C).
Bed: 45°C- 5°C below the generic floor (generic PLA: 50-60°C).
Community Verdict
Excellent
Recommended 220°C nozzle / 45°C bed. Max volumetric flow ~50.29 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PLA brands, see the PLA profile.
DIALED-IN FLSUN SETTINGS
Generate a complete slicer profile tuned for FLSun on your specific printer and slicer in seconds.
Generate Settings for FLSun