PLA brand profile
FDPLAST
Recommended 215°C nozzle / 65°C bed. Single-source profile (cura); verify before relying on it.
Community: GoodPLA
Brand-Specific Recommended Settings
Recommended Nozzle
215°C
Generic PLA: 200-210°C
Recommended Bed
65°C
Generic PLA: 50-60°C
Max Print Speed
80 mm/s
Inherited from PLA profile
How FDplast Differs from Generic PLA
Nozzle: 215°C- 5°C above the generic ceiling (generic PLA: 200-210°C).
Bed: 65°C- 5°C above the generic ceiling (generic PLA: 50-60°C).
Community Verdict
Good
Recommended 215°C nozzle / 65°C bed. Single-source profile (cura); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PLA brands, see the PLA profile.
DIALED-IN FDPLAST SETTINGS
Generate a complete slicer profile tuned for FDplast on your specific printer and slicer in seconds.
Generate Settings for FDplast