PLA brand profile
FABTOTUM
Recommended 200°C nozzle / 40°C bed. Single-source profile (cura); verify before relying on it.
Community: GoodPLA
Brand-Specific Recommended Settings
Recommended Nozzle
200°C
Generic PLA: 200-210°C
Recommended Bed
40°C
Generic PLA: 50-60°C
Max Print Speed
80 mm/s
Inherited from PLA profile
How FABtotum Differs from Generic PLA
Nozzle: 200°C- at the generic minimum (generic PLA: 200-210°C).
Bed: 40°C- 10°C below the generic floor (generic PLA: 50-60°C).
Community Verdict
Good
Recommended 200°C nozzle / 40°C bed. Single-source profile (cura); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PLA brands, see the PLA profile.
DIALED-IN FABTOTUM SETTINGS
Generate a complete slicer profile tuned for FABtotum on your specific printer and slicer in seconds.
Generate Settings for FABtotum