PLA brand profile
DELTAMAKER
Recommended nozzle temp 230°C. Max volumetric flow ~11.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
Community: GoodPLA
Brand-Specific Recommended Settings
Recommended Nozzle
230°C
Generic PLA: 200-210°C
Recommended Bed
50°C
Generic PLA: 50-60°C
Max Print Speed
80 mm/s
Inherited from PLA profile
How DeltaMaker Differs from Generic PLA
Nozzle: 230°C- 20°C above the generic ceiling (generic PLA: 200-210°C).
Bed: 50°C- at the generic minimum (generic PLA: 50-60°C).
Community Verdict
Good
Recommended nozzle temp 230°C. Max volumetric flow ~11.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PLA brands, see the PLA profile.
DIALED-IN DELTAMAKER SETTINGS
Generate a complete slicer profile tuned for DeltaMaker on your specific printer and slicer in seconds.
Generate Settings for DeltaMaker