PC (Polycarbonate) brand profile
VOLUMIC
Recommended 280°C nozzle / 120°C bed. Max volumetric flow ~29.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
Community: GoodPC (Polycarbonate)
Brand-Specific Recommended Settings
Recommended Nozzle
280°C
Generic PC (Polycarbonate): 265-275°C
Recommended Bed
120°C
Generic PC (Polycarbonate): 100-120°C
Max Print Speed
45 mm/s
Inherited from PC (Polycarbonate) profile
How Volumic Differs from Generic PC (Polycarbonate)
Nozzle: 280°C- 5°C above the generic ceiling (generic PC (Polycarbonate): 265-275°C).
Bed: 120°C- at the generic maximum (generic PC (Polycarbonate): 100-120°C).
Community Verdict
Good
Recommended 280°C nozzle / 120°C bed. Max volumetric flow ~29.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PC (Polycarbonate) brands, see the PC (Polycarbonate) profile.
DIALED-IN VOLUMIC SETTINGS
Generate a complete slicer profile tuned for Volumic on your specific printer and slicer in seconds.
Generate Settings for Volumic