PC (Polycarbonate) brand profile
QIDI TECH
Recommended 270°C nozzle / 75°C bed. Single-source profile (openfilament); verify before relying on it.
Community: GoodPC (Polycarbonate)
Brand-Specific Recommended Settings
Recommended Nozzle
270°C
Generic PC (Polycarbonate): 265-275°C
Recommended Bed
75°C
Generic PC (Polycarbonate): 100-120°C
Max Print Speed
45 mm/s
Inherited from PC (Polycarbonate) profile
How Qidi Tech Differs from Generic PC (Polycarbonate)
Nozzle: 270°C- sits inside the generic PC (Polycarbonate) range (265-275°C).
Bed: 75°C- 25°C below the generic floor (generic PC (Polycarbonate): 100-120°C).
Community Verdict
Good
Recommended 270°C nozzle / 75°C bed. Single-source profile (openfilament); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PC (Polycarbonate) brands, see the PC (Polycarbonate) profile.
DIALED-IN QIDI TECH SETTINGS
Generate a complete slicer profile tuned for Qidi Tech on your specific printer and slicer in seconds.
Generate Settings for Qidi Tech