PC (Polycarbonate) brand profile
IEMAI
Recommended 265°C nozzle / 90°C bed. Single-source profile (openfilament); verify before relying on it.
Community: GoodPC (Polycarbonate)
Brand-Specific Recommended Settings
Recommended Nozzle
265°C
Generic PC (Polycarbonate): 265-275°C
Recommended Bed
90°C
Generic PC (Polycarbonate): 100-120°C
Max Print Speed
45 mm/s
Inherited from PC (Polycarbonate) profile
How Iemai Differs from Generic PC (Polycarbonate)
Nozzle: 265°C- at the generic minimum (generic PC (Polycarbonate): 265-275°C).
Bed: 90°C- 10°C below the generic floor (generic PC (Polycarbonate): 100-120°C).
Community Verdict
Good
Recommended 265°C nozzle / 90°C bed. Single-source profile (openfilament); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PC (Polycarbonate) brands, see the PC (Polycarbonate) profile.
DIALED-IN IEMAI SETTINGS
Generate a complete slicer profile tuned for Iemai on your specific printer and slicer in seconds.
Generate Settings for Iemai