PC (Polycarbonate) brand profile
FLASHFORGE
Max volumetric flow ~18.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
Community: GoodPC (Polycarbonate)
Brand-Specific Recommended Settings
Recommended Nozzle
265°C
Generic PC (Polycarbonate): 265-275°C
Recommended Bed
110°C
Generic PC (Polycarbonate): 100-120°C
Max Print Speed
45 mm/s
Inherited from PC (Polycarbonate) profile
How Flashforge Differs from Generic PC (Polycarbonate)
Nozzle: 265°C- at the generic minimum (generic PC (Polycarbonate): 265-275°C).
Bed: 110°C- sits inside the generic PC (Polycarbonate) range (100-120°C).
Community Verdict
Good
Max volumetric flow ~18.0 mm³/s. Single-source profile (orcaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PC (Polycarbonate) brands, see the PC (Polycarbonate) profile.
DIALED-IN FLASHFORGE SETTINGS
Generate a complete slicer profile tuned for Flashforge on your specific printer and slicer in seconds.
Generate Settings for Flashforge