PC (Polycarbonate) brand profile
EMOTIONTECH
Recommended 280°C nozzle / 120°C bed. Single-source profile (cura); verify before relying on it.
Community: GoodPC (Polycarbonate)
Brand-Specific Recommended Settings
Recommended Nozzle
280°C
Generic PC (Polycarbonate): 265-275°C
Recommended Bed
120°C
Generic PC (Polycarbonate): 100-120°C
Max Print Speed
45 mm/s
Inherited from PC (Polycarbonate) profile
How eMotionTech Differs from Generic PC (Polycarbonate)
Nozzle: 280°C- 5°C above the generic ceiling (generic PC (Polycarbonate): 265-275°C).
Bed: 120°C- at the generic maximum (generic PC (Polycarbonate): 100-120°C).
Community Verdict
Good
Recommended 280°C nozzle / 120°C bed. Single-source profile (cura); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all PC (Polycarbonate) brands, see the PC (Polycarbonate) profile.
DIALED-IN EMOTIONTECH SETTINGS
Generate a complete slicer profile tuned for eMotionTech on your specific printer and slicer in seconds.
Generate Settings for eMotionTech