ASA brand profile
TECTONIC 3D ASA
Recommended 260°C nozzle / 90°C bed. Max volumetric flow ~11.0 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodASA
Shop Tectonic 3D ASA →Affiliate link - helps support FixMyPrint
Brand-Specific Recommended Settings
Recommended Nozzle
260°C
Generic ASA: 255-265°C
Recommended Bed
90°C
Generic ASA: 95-110°C
Max Print Speed
60 mm/s
Inherited from ASA profile
How Tectonic 3D Differs from Generic ASA
Nozzle: 260°C- sits inside the generic ASA range (255-265°C).
Bed: 90°C- 5°C below the generic floor (generic ASA: 95-110°C).
Community Verdict
Good
Recommended 260°C nozzle / 90°C bed. Max volumetric flow ~11.0 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all ASA brands, see the ASA profile.
DIALED-IN TECTONIC 3D SETTINGS
Generate a complete slicer profile tuned for Tectonic 3D on your specific printer and slicer in seconds.
Generate Settings for Tectonic 3D