ASA brand profile
FILAMENT PM
Recommended 255°C nozzle / 105°C bed. Max volumetric flow ~5.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodASA
Brand-Specific Recommended Settings
Recommended Nozzle
255°C
Generic ASA: 255-265°C
Recommended Bed
105°C
Generic ASA: 95-110°C
Max Print Speed
60 mm/s
Inherited from ASA profile
How Filament PM Differs from Generic ASA
Nozzle: 255°C- at the generic minimum (generic ASA: 255-265°C).
Bed: 105°C- sits inside the generic ASA range (95-110°C).
Community Verdict
Good
Recommended 255°C nozzle / 105°C bed. Max volumetric flow ~5.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all ASA brands, see the ASA profile.
DIALED-IN FILAMENT PM SETTINGS
Generate a complete slicer profile tuned for Filament PM on your specific printer and slicer in seconds.
Generate Settings for Filament PM